VERTICAL WASHING MACHINES / STANDARD
DESCRIPTION
Double glazing washers adopt a modular design, so they can be adapted to the needs of the individual customer.
Washing machine composed of 4 m input and output modules. The glass is transported via a system of anti-cut rollers with friction components to increase operator safety.
Washing machine body in stainless steel and powder coated. Length 3.2 m.
Corrosion-resistant components in contact with water.
Machine equipped with 6 brushes with a diameter of 180 mm with stainless steel shafts and aluminum supports.
Water management group composed of 4 washing zones with tanks, pumps, filters and internal parts in stainless steel.
Thanks to the shape of the tank, water consumption is reduced to the bare minimum, reusing waste water from one sector to another.
Possibility of connecting the last rinsing zone directly to the demineralizer.
Thermostat-controlled heating system as standard on the entire range.
Drying served by a fan mounted in an insulated box to reduce noise, with a shutter to manage the air flow and therefore allow greater energy savings during work stops.
Adjustable working speed and controlled exclusively by electronic systems to maintain constant torque even with different weights.
Output module equipped with a new system of continuous LED lights to allow better control of the washing quality. The glass is transported via a system of anti-cut rollers, mounted on friction components to increase operator safety.
Machine set up as standard for connection to other work modules.
ALWAYS CONNECTED
All automatic lines can be connected to our monitoring centre simply by connecting the line to the internet with the following advantages:
-
Possibility of remote troubleshooting;
-
Reduction of machine downtime;
-
Instant control of the aging of electronic components;
-
Possibility of excluding sensors to be able to continue production while waiting for a spare part (provided it doesn’t compromise the operator's safety).
TECHNICAL SPECIFICATIONS
Power supply
400 Vac Three-phase + Neutral 50 Hz
Total consumption
24 Kw 400 Vac 50 Hz
Fan motor
11 Kw 400 Vac Three-phase 50 Hz
Washing brushes
6 of 180 mm standard
(optional LOW-E)
Water pumps
4 pumps, one for each washing area
Hot water resistance
4.5 Kw 400 Vac Three-phase 50 Hz
Washable glass dimensions
Min 500 x 300h mm approx.
Max 4000 x 3300h mm
Washable thicknesses
From 3 to 24 mm. Self-adjustable
Panel pressable thicknesses
80 mm approx.
Working direction
From left to right
Working speed
From 1 to 5 meters per minute
Work surface
650/750 mm approx.
Height
4400 mm approx.
Length
13,3 mt approx.
Width
2500 mm approx.
Weight
5600 Kg approx.
We recommend water supplied to the washing machine has the following characteristics:
Conductivity = less than 10 uS (microsiemens)
Hardness total = less than 5° F (French degrees)
Salt content = less than 5 mg/L
Chloride = less than 5 mg/L
Iron = less than 0,05 ppm
Torbidity = less than 0,5 ft
NB: The results of the window washing may be compromised if the water values are higher than the above recommended amounts. Upon request we can provide equipment for cleaning the water.
FEATURES
WATER RECOVERY
Water is an important resource. The ECO WATER washing system allows double reuse of water, avoiding unnecessary waste while maintaining optimal quality at the end of the process.
LONG DURATION
Attention to durability over time is synonymous with quality: all parts of the machine in contact with water are made of powder-coated stainless steel, brush supports and aluminum tows, stainless steel pipes, brass spray nozzles.
ENERGY SAVING
Avoid unnecessary consumption during processing, thanks to this system that decreases the absorption of the engine while always keeping the air flow active, consumption is significantly reduced.
SAFE TRANSPORT
The operator's safety is fundamental, but the glass must be moved for processing. The system adopted allows the glass to be blocked at any time with the rollers in motion. All this thanks to an innovative type of transport.
EASY MAINTENANCE
Thanks to the sectored construction type, maintenance and cleaning are convenient, easy and fast.
NOISE REDUCTION
Drying is served by a fan mounted in an insulated box to reduce noise with a damper to manage the air flow and therefore allows greater energy savings during processing stops. Air cleaning is guaranteed by a removable filter.
CONTROLLED OPENING
Machine body opening system controlled by an electrical system that guarantees perfect parallelism across the entire height of the machine.
INDEPENDENT BRUSHES
La zona lavaggio è corredata da 6 spazzole completamente indipendenti e gestite da inverter per un controllo più uniforme della rotazione mantenendo costante la coppia di lavoro.
TOUCH SCREEN CONTROLS
Simple and intuitive, it is the control panel that with the EASY TOUCH formula, allows the operator to manage the entire line and control all the machine parameters. Thanks to this system the machine can be connected to our headquarters for maintenance and any resolution of machine downtime.
OPTIONALS
LOW-E BRUSHES
These type of brushes have special bristles that allow you to work with more delicate glass. They are complete components with a stainless-steel shaft.
TILTING EXIT
3 m folding output module operated by a jack controlled by an electronic inverter. The module can be used both as a fixed storage and a sealing table.
PLUG IN INTERCONNECTION
Thanks to the modular construction system, it is possible to adapt the machine to all customer needs with interconnection systems that can communicate with most machines on the market.