top of page

HORIZONTAL WASHING MACHINES

DESCRIPTION

Washing machine composed of a 1.5 m input and output module. The glass is transported via a system of cut-proof rollers connected to each other by stainless steel chains and self-adjusting brass supports.

Washing machine body in stainless steel and powder coated.

 

Corrosion-resistant components in contact with water.

 

Machine equipped with 6 brushes with stainless steel shafts and aluminum supports.

 

Water management group composed of a washing area with tank, pump, filters and internal parts in stainless steel.

 

Thanks to the shape of the tank, water consumption is reduced to the bare minimum, reusing waste water from one sector to another.

 

Possibility of connecting the last rinsing area directly to the demineralizer.

 

Thermostat-controlled heating system as standard on the entire range.

 

Drying served by a fan mounted in an insulated box to reduce noise, connected to a distributor designed not to vary the air flow to the 4 blowers of the machine.

 

Adjustable working speed controlled exclusively by electronic systems to maintain constant torque even with different glass sizes.

 

Adjustable work surface height from 900 mm (+/- 60 mm)

 

Machine set up as standard for connection to other work modules.

Model

STANDARD HORIZONTAL WASHING MACHINE FROM 1600 / 6 BRUSHES

MHXX00.jpg

ALWAYS CONNECTED

All automatic lines can be connected to our monitoring centre simply by connecting the line to the internet with the following advantages:

  • Possibility of remote troubleshooting;

  • Reduction of machine downtime;

  • Instant control of the aging of electronic components;

  • Possibility of excluding sensors to be able to continue production while waiting for a spare part (provided it doesn’t compromise the operator's safety).

bkg-3.jpg

TECHNICAL SPECIFICATIONS

Power supply

400 Vac Three-phase + Neutral 50 Hz

Total absorbed power

12 Kw 400 Vac 50 Hz

 

Fan motor

1 x 9 Kw 400 Vac Three-phase 50 Hz

 

Washing areas

1 with recycling pump and filter

Rinsing areas

1 with demineralizer connection

Washing brushes

6 standard 140 mm

(optional LOW-E)

 

Drying area blowers

2 upper and 2 lower

 

Minimum washable glass

200 x 200 mm

 

Washable thicknesses

From 3 to 12 mm. Self-adjusting

 

Working speed

From 2 to 5 meters per minute

 

Height

1360 mm approx.

 

Length

6200 mm approx.

 

Width

2100 mm approx.

 

Weight

2000 Kg approx.

We recommend water supplied to the washing machine has the following characteristics:

Conductivity = less than 10 uS (microsiemens)
Hardness total = less than 5° F (French degrees)
Salt content = less than 5 mg/L
Chloride = less than 5 mg/L
Iron = less than 0,05 ppm
Torbidity = less than 0,5 ft

NB: The results of the window washing may be compromised if the water values are higher than the above recommended amounts. Upon request we can provide equipment for cleaning the water.

FEATURES

31 - Trasporto facile.jpg

CONTROLLED TRANSPORT

The system adopted allows the glass to be kept adherent to the moving rollers at all times. All this thanks to an innovative type of transport controlled by an inverter.

32 - Manutenzione.jpg

EASY MAINTENANCE

Thanks to the type of construction in sectors, maintenance and cleaning are convenient, easy and fast.

33 - Riduzione rumore.jpg

NOISE REDUCTION

Drying is served by a fan mounted in an insulated box to reduce noise with a shutter to manage the air flow and therefore allows greater energy savings during processing stops. Air cleaning is guaranteed by a removable filter.

34 - Aperutra autoreg.jpg

SELF-ADJUSTING OPENING

The transport system adapts to the thickness of the glass using supports specifically designed to reduce pressure on the glass.

35 - Spazzole.jpg

LONG-LASTING BRUSHES

The washing area is equipped with 6 completely independent brushes. The shape of the bristles and the constant distribution of water guarantee a long life over time.

36 - Comandi touch.jpg

TOUCH SCREEN CONTROLS

Simple and intuitive, it is the control panel that with the EASY TOUCH formula, allows the operator to manage the entire line and control all the machine parameters. Thanks to this system the machine can be connected to our headquarters for maintenance and any resolution of machine downtime.

OPTIONALS

LOW-E BRUSHES

This type of brush with special bristles allows you to work with more delicate glass. The brushes are entire components including a stainless steel shaft.

OPT-04 - Riscaldamento.jpg

WATER HEATING

The heating system is composed of a powerful resistance (4.5 kW 400 Vac Three-phase) controlled by an adjustable thermostat.

OPT-05 - Apertura.jpg

MACHINE OPENING 12-24

The machine can work glass up to 24 mm thick thanks to the inclusion of a pneumatic system that manages thicknesses from 2 to 12 mm and from 12 to 24 mm.

OPT-06 - Apertura.jpg

OPENING FOR MAINTENANCE

The movement system using recirculating ball screws allows the machine to handle thicknesses up to 24 mm or more and open for maintenance up to 400 mm.

OPT-07 - Prelavaggio.jpg

PRE-WASH

The washing machine is designed for the insertion of a pre-wash module to eliminate grinding residues before entering the machine.

bottom of page